Flat, close-fitting freeriding backpack, compatible with back protector

They are essential and light, ideal for riders looking to contain the weight of the setup ...

The flex-lock compatible Karakoram carbon Nyolite hibacks are supplied in pairs with the Dual Ride-Stride adjusters and the necessary mounting hardware. Flex 7/10

Amplid Pro Skin Precut Mohair Blend by Kohla with hooks for splitboards with skinholes

These skins are only compatible with the Milligram starting from season 22/23!

Precut adhesive skins by our Austrian friends at Kohla

They are essential and stiff, ideal for riders looking to contain the weight of the setup ...

The flex-lock compatible Karakoram carbon fiber hibacks are supplied in pairs with the Dual Ride-Stride adjusters and the necessary mounting hardware. Flex 9/10

They are essential and ideal for riders looking to ride steep couloirs or fast lines...

The flex-lock compatible Karakoram C4 hibacks are supplied in pairs with the Dual Ride-Stride adjusters and the necessary mounting hardware. Flex 8/10

Pre-cut for Nitro Vertical, Doppelganger and Squash splitboards, Vertical skins offer maximum performance thanks to Kohla's new Fiber Seal and Smart Glue technologies. Fiber Seal technology prevents leathers from absorbing water, for better grip and a low-friction glide in varying conditions. Smart Glue is a solvent-free adhesive that adheres best in wet or cold conditions. Skins with Smart Glue are easier to remove than traditional skins.

NITRO VERTICAL BY KOHLA SKINS FEATURES:

• Made in Austria
• Water resistant
• Solvent free
• Trim to fit
• Easy handling
• 100% waterproof
• Easy release

If you're rocking a Nitro Team Split, the Nitro Team Splitboard Skins are an easy win. They're made of a nylon-mohair blend for the ideal balance of grip and glide, with metal speedhook attachments on both tip and tail for lightning-fast transitions. Grab the right size for your board and hit the skin track!ta!

NITRO TEAM BY KOHLA SKINS FEATURES:

• 65% Mohair / 35% Nylon – A mix of Mohair and Nylon fibers make these skins glide effortlessly while generating maximum grip.
• Metal Speedhooks – Metal Speedhooks on both ends match mounting holes in the boards tip and tail for quick and easy setup.
• 100% Waterproof
• Easy Release Smart Glue
• Fiber Seal Technology
• Solvent Free
• Laser Cut to Fit the Nitro Team Splitboard
• Pre-Cut

Made with the perfect blend of 70% mohair and 30% nylon, Hyper Glide Splitboard Skins are light, grippy, and glide so well you’ll think you left your skins in your pack. Indestructible asymmetric heat-treated aluminum clips and Voile Strap style tail straps ensures your skins stay snug and secure, while a 100% waterproof membrane between the fibers and the adhesive drastically improves durability and glue performance while reducing weight and making them more pliable for easy stowing. And the Ever Dry hydrophobic treatment makes sure they keep gripping, whatever the weather—no need for sprays or waxes to stop the glop.

Each set of Hyper Glide skins comes with a trim tool, nylon stuff sack, and a promise to be the best skins you’ve ever slapped on your board.

SIZES:

• S: 148-154 CM
• M: 155-162 CM
• L:  163-169 CM

VOILE HYPER GLIDE SKINS FEATURES:

• 70% Mohair – 30% Nylon
• Hardened and Anodized Aluminum Tip & Tail Plates
• Stainless Steel Rivets
• Stainless Steel Full-Wrap Tip Loop
• Indestructible Urethane Tail Strap
• Hardened and Anodized Aluminum Tail Clip

These skins harness POMOCA’s research and development of materials, weaving techniques, and fiber attachment systems to provide a combination of gripping power and durability in a light weight package:

• Safer Skin: A 100% waterproof membrane that prevents the transfer of moisture between the skin’s plush and adhesive layers. This drastically improves the glue performance from edge to edge while also increasing the skin’s tear resistance. This (2nd) generation of their lining is made with finer layers, which effectively reduce weight and make the skin more pliable (easier to trim, handle, and stow).
• Ever Dry: This hydrophobic treatment is applied to the entire length of the skin’s fibres, guaranteeing life-long protection without the need for antiglopping sprays.

Tired of crowded resorts and long lines?

Deep days await with the Union Rover approach skis. Explore your local hills, backcountry or closed resorts, all while enjoying the rideability of your favorite snowboard in your quiver. The Union Rover works in perfect harmony with the Union Explorer bindings, and easily swaps onto your regular snowboard in seconds so you can enjoy the ride down.

Ascent Characteristics:

• Light and Maneuverable 

• Fast and Easy
• Transitions 
Integrated
• Climbing Skins 

• Ride the Solid Board of your choice for any condition or terrain

• Hand-Crafted in Austria at The Capita Mothership with 100% Clean Energy

D3O impact protection in a highly mobile vest

Your safety is not to be messed with. The Baseframe Pro D3O® Vest puts that safety front and center with impact absorbing D3O armor set to take the brunt of the impact should it occur.

NITRO NOMAD PEAK BY KOHLA SKINS FEATURES:

• Specific solvent-free Hot-Melt glue
• Application range up to -30°C
• Prefabricated skin strip
• Supplied with skin bag, protective foil
• Multifit Skin
• Mixmohair (65% mohair/35% nylon)
• 4 layer lamination
• Exclusive speed webbing Nitro
• Water-resistant fluorocarbon impregnation
• Solvent-free coating
• Polyester-cotton back layer system
• PA and TPE plastic parts
• Stainless steel tip attachment

KOHLA ALPINIST 100% MOHAIR SKINS FEATURES:

• Application range up to -30°C
• Prefabricated skin strip (135 mm width)
• Supplied with skin bag, protective foil
• Lenght 170 cm100% Mohair
• Smart Glue
• High-precision laser cutting
• Butterfly back attachment
• Easy length adjustement with Elastic Strap
• Plastic parts made of the top-quality materials
• Stainless steel tip attachment

Made with the perfect blend of 70% mohair and 30% nylon, Hyper Glide Splitboard Skins are light, grippy, and glide so well you’ll think you left your skins in your pack. Indestructible asymmetric heat-treated aluminum clips and Voile Strap style tail straps ensures your skins stay snug and secure, while a 100% waterproof membrane between the fibers and the adhesive drastically improves durability and glue performance while reducing weight and making them more pliable for easy stowing. And the Ever Dry hydrophobic treatment makes sure they keep gripping, whatever the weather—no need for sprays or waxes to stop the glop.

Each set of Hyper Glide skins comes with a trim tool, nylon stuff sack, and a promise to be the best skins you’ve ever slapped on your board.

SIZES:

• S: 148-154 CM
• M: 155-162 CM

VOILE HYPER GLIDE SKINS FEATURES:

• 70% Mohair – 30% Nylon
• Hardened and Anodized Aluminum Tip & Tail Plates
• Stainless Steel Rivets
• Stainless Steel Full-Wrap Tip Loop
• Indestructible Urethane Tail Strap
• Hardened and Anodized Aluminum Tail Clip

These skins harness POMOCA’s research and development of materials, weaving techniques, and fiber attachment systems to provide a combination of gripping power and durability in a light weight package:

• Safer Skin: A 100% waterproof membrane that prevents the transfer of moisture between the skin’s plush and adhesive layers. This drastically improves the glue performance from edge to edge while also increasing the skin’s tear resistance. This (2nd) generation of their lining is made with finer layers, which effectively reduce weight and make the skin more pliable (easier to trim, handle, and stow).
• Ever Dry: This hydrophobic treatment is applied to the entire length of the skin’s fibres, guaranteeing life-long protection without the need for antiglopping sprays.

FEATURES RAS REMOVABLE CARBON FULL CYLINDER:

When you're venturing into the backcountry, add the Removable Airbag 3.0® system from Mammut® to any of our Poacher RAS styles for added safety. Certified for use in North America, this compressed air cylinder is refillable at certified locations across the globe.

• This unit must be paired with R.A.S. Removable Airbag 3.0® (sold separately)
• CYLINDERS ARE EMPTY AND MUST BE FILLED PRIOR TO USE

Note: before purchasing this item, contact us. Air shipments are prohibited as the article is classified as "dangerous goods".

The Blaze TR is Tour Ready, with LT brackets and dual height wires, so all you need in addition is pucks, a splitboard, and motivation to get out there.

This original pin mount model is an economical yet high-performance choice for new or seasoned splitboarders. The Blaze TR is designed for the all-around adventurer looking for straightforward tech and lightweight touring deep into the backcountry. The Spark Blaze TR now features our Pillow Line ankle and toe straps. The Blaze ankle strap has a small footprint around the boot with a flex window for max agility while maintaining support.

FEATURES:

• BALANCE BOARD WEIGHT: 10 -13 Kg
• MAX RIDER WEIGHT: 100 Kg
• MAX SPEED: 10 Km/h
• MAX: 20 - 25 Km
• MAX ASCEND ANGLE: 15°
• BATTERY: SAMSUNG, 36V 4.4Ah, litium, rechargable
• VOLTAGE: 100-240 V
• SIZES: L584mm*W220mm*H178mm
• FRAME HEIGHT: 25mm
• WHEELS: 7 pollici

SPECIFICHE BATTERIA:

• BATTERY TIPE: LITIUM
• CHARGE TIME: 2-3 HOURS
• VOLTAGE: 36V

CONTENUTO DELLA CONFEZIONE:

• TOTAL MOVE SMART BALANCE BOARD
• BATTERY CHARGER
• TRANSPORTATION BAG
• INSTRUCTION MANUAL