SPLITBOARD UPGRADES & SPARES

( 21 products )

Category reserved for original spare parts and upgrades to make your splitboard more and more light and performing

UNION SPLITBOARD STRAP

SPLITBOARD UPGRADES & SPARES

Use to hold splitboard, Union Rover or skis together while hiking

Price €9.90

PLUM INTERFACE 4X2

SPLITBOARD UPGRADES & SPARES

Plum I.M.A raises for big foots sizes

Recommendations:
  • Compatible with all splitboards with Voile inserts
  • Recommended from 44 EU and up
Price €85.00

PLUM INTERFACE 4X2

SPLITBOARD UPGRADES & SPARES

Even in-resort keep your splitboard bindings

Interface designed for classic snowboards. 4 x 2 toe insert system letting you keep your splitboard bindind even when riding in -resort.

Recommendations: Compatible with all snowboards with 4x2 inserts.
Price €114.00

KARAKORAM ULTRACLIP 3C WITH...

SPLITBOARD UPGRADES & SPARES

CLIPS FEATURES:

  • ACTIVE JOINING
  • Smaller footprint for less visible clutter.
  • SET SCREW MICRO-ADJUSTMENT
  • Increase or decrease tension in the UltraClip with the turn of a screw.
  • 10% lighter.  Every gram counts.

Specifications

  • Compatible with Top Mount Board and Through Mount Boards
  • Boards with Fine Thread Inserts require custom hardware
Price €109.95

SPARK CROSSBAR CLIPS THROUGH MOUNT

SPLITBOARD UPGRADES & SPARES

For splitboarders who want the tightest possible connection or for boards with seam straightness issues, the Crossbar Clip is built for the job. Our creative design features a one-piece crossbar that extends from one set of bolts to the other. Clamping tension is finetuned by turning a set-screw. Made from aluminum and brass with only two moving parts, the Crossbar Clip closes any gap in the seam and keeps your board tight. The crossbar and lever rotate out of the way. As a bonus feature, they can be entirely set up with the M3 hex bit on your Spark tool.

This model of Crossbar Clip is for through-mount splitboards that are drilled through at the clip mounting points (you can see screw heads on the base of your board). We have Top-Mount Crossbar Clips for boards with inserts (you do not see any screw heads on the base of your board).

Includes: 2 x Levers, 2 x Crossbars, 2 x Shear Bushings, screws, and extra screws for use with thinner boards.

Weight: 3.38oz/pr (96g)


Price €60.00
  • Out of Stock

SPARK CROSSBAR CLIPS TOP MOUNT

SPLITBOARD UPGRADES & SPARES

For splitboarders who want the tightest possible connection or for boards with seam straightness issues, the Crossbar Clip is built for the job. Our creative design features a one-piece crossbar that extends from one set of bolts to the other. Clamping tension is finetuned by turning a set-screw. Made from aluminum and brass with only two moving parts, the Crossbar Clip closes any gap in the seam and keeps your board tight. The crossbar and lever rotate out of the way. As a bonus feature, they can be entirely set up with the M3 hex bit on your Spark tool.

Top-Mount Crossbar Clips are for splitboards that have inserts at the clip mounting points (you can't see screw heads on the base of your board). We have Through-Mount Crossbar Clips for boards without inserts (you can see screw heads on the base of your board).

Includes: 2 x Levers, 2 x Crossbars, 2 x Shear Bushings, screws for both fine thread and coarse inserts, as well as extra screws for use with thinner boards.

Weight: 3.24oz/pr (92g)

Price €60.00

SPARK FIXIE CLIPS THROUGH MOUNT

SPLITBOARD UPGRADES & SPARES

Our Fixie Clips come in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate for varying board hole patterns. They shed snow and ice, and won’t slip over time.

This model of Fixie Clip is for through-mount splitboards that are drilled through at the clip mounting points (you can see screw heads on the base of your board). We have Top-Mount Fixie Clips for boards with inserts (you do not see any screw heads on the base of your board).

Includes: 2 left clips, 2 right clips, (8) 12mm screws (for thin boards),  (8) 14 mm screws (for thick boards), 4 grip nuts, 2  square nuts.

Weight: 2.26oz/pr (64g)


Price €45.00

SPARK FIXIE CLIPS TOP MOUNT

SPLITBOARD UPGRADES & SPARES

Our Fixie Clips come in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate for varying board hole patterns. They shed snow and ice, and won’t slip over time.

Top-Mount Fixie Clips are for splitboards that have inserts at the clip mounting points (you can't see screw heads on the base of your board). We have Through-Mount Fixie Clips for boards without inserts (you can see screw heads on the base of your board).

Includes: 2 left clips, 2 right clips, (8) 10mm coarse-thread screws, (8) fine coarse-thread screws, 4 grip washers.

Weight: 1.98oz/pr (56g)

Price €45.00

SPARK TIP & TAIL CLIPS

SPLITBOARD UPGRADES & SPARES

Our tip and tail clip design offers a custom fit to match the variability in any board. With five progressively tighter notches, you can get your board as tight as you want.  No need to freeze your fingers, this clip is effortlessly operated with your gloves on. 

Includes: Clips and mounting hardware.

Weight: 0.56 oz/pr (16g)

Price €33.00

PLUM EVA BASEPLATE

SPLITBOARD UPGRADES & SPARES

Recommendations: Compatible with all splitboards with Voile inserts.
Price €40.00

PLUM DBOARD

SPLITBOARD UPGRADES & SPARES

Enhance your board’s performance with the D-board

The D-board increases performance in ride mode and increases force between the two skis of your splitboard.

IMPORTANT: To be mounted only on splitboards with inserts conforming to the Voilé standard. Use the original screws provided with your splitboard bracket only if they meet the 5 mm to 5.5 mm insertion depth in the board (snowboard standard). If not, use appropriate screws that meet this standard. Follow the mounting instructions supplied with your D-board. Screws not included.

Price €49.00

VOILE SKIN TAIL STRAPS 15"

SPLITBOARD UPGRADES & SPARES

Tail straps for splitboard climbing skins. 10" length skin tail straps are used on regular splitboard skins. 15" length is used on V-Tail splitboard skins.

Price €14.00

VOILE SKIN TAIL STRAPS 10"

SPLITBOARD UPGRADES & SPARES

Tail straps for splitboard climbing skins. 10" length skin tail straps are used on regular splitboard skins. 15" length is used on V-Tail splitboard skins.

Price €14.00

VOILE T-NUTS FOR SPLITBOARD...

SPLITBOARD UPGRADES & SPARES

A set of 8 Voile T-Nuts (M6) for mounting your splitboard binding to the Voile Channel Puck System.

The re-imagined T-Nuts for Voile Splitboard Channel Puck System allow you to make stance adjustments faster and easier, create a more secure mount for Voile splitboard bindings, and extend the system's compatibility with third-party bindings such as Phantom and Karakoram.

Price €9.00

VOILE SPLIT KIT DIY " CUT YOUR...

SPLITBOARD BINDING SPARES

Attention! Please Read! This hardware kit is for Sawing Your Old Board. Does NOT mount onto factory-built splitboards that have inserts!

Improved!

The Voile Split Kit is the do it yourself saw your old board kit.

The Voile Split Kit includes all the DIY Voile splitboard hardware and step-by-step instructions to split your old board.

Included Slider Track is compatible with regular snowboard bindings.

Improvements include completely new Voile Split Kit Puck with 2-hole secure t-nut mounting, lighter Voile touring brackets, more durable rear tabs on the Voile Slider Track, new binding support riser for easier uphill skinning and side-hilling, and new dual height climbing wires.
Price €239.00

VOILE SPLITBOARD HARDWARE CANTED...

SPLITBOARD UPGRADES & SPARES

INCLUDES:

  • 4 canted pucks UPDATED PUCK DESIGN!
  • 4 puck gaskets
  • 2 in-line slot discs
  • 2 parallel slot discs
  • 8 - M6 x 10.7mm truss-head screws
  • 1 Alignment guide.
Price €79.00

KARAKORAM TIP / TAIL LOCK

SPLITBOARD UPGRADES & SPARES

Replacement KaraKoram toe / tail clips for splitboards complete with hardware for those who have yet to punch the snowboard.

FEATURES:

  • Tip-Locks fit existing splitboard tip clip pattern (replaces tip clips)
  • Materials: Dupont Zytel
  • Mounting hardware include
  • Tools for install: 3/8″ Wrench and 1/8″ Allen Wrench
Price €36.95
  • Out of Stock

SPARK CANTED PUCKS FOR SPLITBOARDS

SPLITBOARD UPGRADES & SPARES

All the same great features of our Spark Pucks, but with 3° canting for reduced knee strain.

Near infinite adjustability for splitboards with inserts. Quick mounting with super fine foot placement, angle, and toe/heel centering adjustments.

Price €99.00

KARAKORAM ULTRACLIP 2.0 STANDARD...

SPLITBOARD UPGRADES & SPARES

CLIPS FEATURES:

  • ACTIVE JOINING
  • Smaller footprint for less visible clutter.
  • SET SCREW MICRO-ADJUSTMENT
  • Increase or decrease tension in the UltraClip with the turn of a screw.
  • 10% lighter.  Every gram counts.

Specifications

  • Compatible with Top Mount Board and Through Mount Boards
  • Boards with Fine Thread Inserts require custom hardware
Price €71.95

SPARK PUCKS SPLITBOARD

SPLITBOARD UPGRADES & SPARES

Near infinite adjustability for splitboards built with inserts. The unique, patent-pending design gives the Spark Pucks channel-like adjustability for regular splitboards.

Weight: 10.02oz/pr (284g)

Price €99.00

VOILE SPLITBOARD HARDWARE PUCK SET

SPLITBOARD UPGRADES & SPARES

INCLUDES:

  • 4 pucks UPDATED PUCK DESIGN!
  • 4 puck gaskets
  • 2 in-line slot discs
  • 2 parallel slot discs
  • 8 - M6 x 10.7mm truss-head screws
  • 1 Alignment guide.
Price €79.00