SPARK IBEX SPLITBOARD CRAMPON BLACK

SKINS, CRAMPONS & POLES

CRAMPON FEATURES:

Slide in and remove while skinning
Cutouts minimize weight
Includes storage bag to protect other gear in your pack
Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions
Choose the size based on the width of your splitboard:

NARROW 25CM OR LESS

REGULAR 25/26 CM

WIDE 26CM OR MORE

€110.00 €88.00

View product

On sale!
-20%

SPARK T1 STEP LOCKER

SPLITBOARD BINDING SPARES

The option to lock your heel while touring helps you better adapt to diverse terrain types where quick descents, side stepping, and skate-splitting become more effective means of backcountry travel.

Our Step Lock design makes it easier than ever, with the ability to rotate the lever to the locked position, then simply step down to lock the heel. The heel stays securely locked in place until you rotate the lever to the unlocked position.

€59.00 €53.10

Add to cart

-10%

SPARK BD TOURING STRAPS

SPLITBOARD BINDING SPARES

Replacing our fabric and Velcro Strappy Strap is the 25 inch (63.5cm) Black Diamond Touring Strap. It still slots through your Spark R&D highbacks and wraps around your boot for additional edging power while touring, but is more multifunctional as an all-around backcountry tool than its predecessor. Packaged as a set of two.

Weight: 1.3 oz/ea (39g) - 2.6 oz/pr (78g)

€25.00 €22.50

Add to cart

-10%

SPARK PUCKS SPLITBOARD

SPLITBOARD UPGRADES & SPARES

Near infinite adjustability for splitboards built with inserts. The unique, patent-pending design gives the Spark Pucks channel-like adjustability for regular splitboards.

Weight: 10.02oz/pr (284g)

€99.00 €89.10

Add to cart

-10%

SPARK BACKCOUNTRY KIT SPLITBOARD

SPLITBOARD BINDING SPARES

€45.00 €40.50

Add to cart

-10%

BINDING SPLITBOARD SPARK BLAZE TR BLACK 2018

BINDING SPLITBOARD SPARK BLAZE TR BLACK

BINDINGS

The Blaze TR is Tour Ready, with LT brackets and dual height wires, so all you need in addition is pucks, a splitboard, and motivation to get out there.

This original pin mount model is an economical yet high-performance choice for new or seasoned splitboarders. The Blaze TR is designed for the all-around adventurer looking for straightforward tech and lightweight touring deep into the backcountry. The Spark Blaze TR now features our Pillow Line ankle and toe straps. The Blaze ankle strap has a small footprint around the boot with a flex window for max agility while maintaining support.

€329.00 €230.30

View product

On sale!
-30%
Out of Stock

SPARK MR CHOMPS CRAMPONS BLACK

SKINS, CRAMPONS & POLES

When the skin track gets icy and steep, drop in your Mr. Chomps – our first class crampon for pin mount bindings. Lean forward to easily position crampons under the touring pin and remove the same way. Pull up on the crampon riser to keep the full depth of teeth in the snow when using your long climbing wire.

Comes standard with shorty bars for use with our LT bracket.

Weight: 6.4 oz/ea (182g) – 12.8 oz/pr (364g) - Regular

FEATURES:

Compatible with Spark R&D Blaze and Burner bindings
Drop in and remove while skinning, without removing your bindings
Riser mounted on crampon keeps same depth of teeth in snow when using heel lifts
Compatible with Voile dual climbing wires
Includes storage bag to protect other gear in your pack
Choose the size based on the width of your splitboard:

REGULAR 25/26 CM

WIDE 26CM OR MORE

€110.00 €88.00

View product

On sale!
-20%
Out of Stock

SPARK SPLITBOARD SUMMIT SKINS

SKINS, CRAMPONS & POLES

The newly constructed Summit Skins are a full nylon custom design manufactured in the USA. They’re lightweight and feature solid grip with improved glide

SPARK SUMMIT SKINS FEATURES:

SIZES: SMALL (147-161CM) - MEDIUM (159-175CM)
Tailclips: Dual angled hooks can accommodate the ever-changing variety of board shapes on the market. Blunt and Square shapes use the outer hook, while standard and swallowtails use the inner hook. Extended slots in the tailclip offer boundless adjustability for the perfect combination of position, angle, and tail stretcher tension with your board.
Tail Stretcher: Injection molded in-house using a Pebax® thermoplastic material that is tear-resistant and stays flexible even in freezing temperatures. The built-in texture grips the tailclip to keep it firmly positioned with no slippage, and also makes it easy to grab with gloves on.
Industry Leading Material: Full nylon material provides the perfect blend of grip and glide.
Crazy Good Glue: Long-lasting glue is laid down in multiple stripes to be sticky on your board, but not too sticky to pull apart.
Storage: Includes storage bag and trim tool.

€209.00 €167.20

Add to cart

On sale!
-20%

SPARK CANTED PUCKS FOR SPLITBOARDS

SPLITBOARD UPGRADES & SPARES

All the same great features of our Spark Pucks, but with 3° canting for reduced knee strain.

Near infinite adjustability for splitboards with inserts. Quick mounting with super fine foot placement, angle, and toe/heel centering adjustments.

€99.00 €89.10

Add to cart

-10%

SPARK ARC CUTOUT BASAPLATE PADDING

SPLITBOARD BINDING SPARES

SPARK CUTOUT PAD FEATURES:

Increase foot warmth and comfort on long tours with our Baseplate Padding Kits. Made of durable and grippy EVA foam. 3M peel and stick adhesive keeps pads firmly in place. Ideal for long days on the skin track or firm riding conditions.
Cutout (for Magneto, Arc, Arc Pro & Burton Hitchhikers)
Average Weight: 0.67oz/pr (19g)
SIZE CHART:

VERSION	MODEL	MEN'S	WOMEN'S
SIZE 1	ARC		XS/S
SIZE 2	ARC	S	M/L
SIZE 3	ARC	M, L

€22.00 €19.80

View product

-10%

SPARK HARDBOOT DUAL HEIGT WIRES

SPLITBOARD BINDING SPARES

Spark Dual Heigt wires for hardboot!

€75.00 €67.50

View product

-10%

SPARK D REX SPLITBOARD CRAMPONS

SKINS, CRAMPONS & POLES

SPARK D REX CRAMPONS... Designed for our hardcore hardbooters!

Install and remove on the fly for utmost confidence in dicey conditions

€135.00 €121.50

View product

-10%

SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME

SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME

SKINS, CRAMPONS & POLES

If you want the best of the best, we made this for you. A 7075 aluminum crampon body is just as strong, but lighter and thinner than our standard Ibex. It slices through the snow even better with less drag, saving you valuable energy output on the skintrack. Our new dual-width design features one crampon that is slightly wider than the other, allowing the crampons to nest together for easy handling and reduced packing space.
All in all, the Ibex Pro crampon is 22% lighter than our standard Ibex - the lightest split crampon in the world!

SPARK IBEX PRO CRAMPON FEATURES:

Easy Installation and Removal: Slide in and out of touring bracket crampon mounts while skinning, without removing your bindings.
Made for the Steeps: Climbing wire pushes crampon teeth fully into the snow for secure ascents on steep terrain and in firm conditions.
Nesting Design: Our new dual-width design features one crampon that is slightly wider than the other, allowing the crampons to nest together for easy handling and reduced packing space.
Lightweight: Premium 7075 aluminum.
Storage: Includes storage bag to protect other gear in your pack.
Weight: 4.59 oz/ea (130g) – 9.18 oz/pr (260g) - Regular
Compatible with Arc, Surge, AfterBurner, Magneto, & Burton Hitchhiker Bindings.
Heel Locker and Riser Kit compatible.

€145.00 €116.00

View product

On sale!
-20%
Out of Stock

SPARK LT TOURING BRACKETS

SPLITBOARD BINDING SPARES

The LT (light touring) Brackets are lightweight and durable with wider pin contact for greater control and smooth, efficient backcountry touring. Use as spare parts, to set up a second splitboard, or as an upgrade from older style touring brackets. (Note: these come included in your purchase of Blaze TR bindings)

In the Package: LT Brackets, LT Shorty Bars for Chomps compatibility, and screws.

Weight: 2.15 oz/pair (61g)

€42.00 €37.80

View product

-10%
Out of Stock

SPARK T1 RISER KIT

SPLITBOARD BINDING SPARES

Big Feet? We got you covered. Our riser kit screws in underneath touring brackets and heel rests to raise you up. This increases the binding rotation angle while touring to prevent toe strike and increase stride length.

Compatibility: Spark Arc and Surge, Nitro Vertical, Burton HitchHiker

Tesla T1 Weight: 5.43oz/pr (154g)

€29.00 €26.10

View product

-10%

SPARK DYNAFIT TOE ADAPTER PLATES

SPLITBOARD BINDING SPARES

These adapters allow you drill-free use of Dynafit Speed Radical, Speed Turn, or Low Tech Race toe pieces by utilizing the existing inserts in your splitboard. Couple with our Hardboot Dual Height Wires to be ready to tour.

Weight: 2.05 oz/ea (58g) - 4.09 oz/pr (116g)

€75.00 €67.50

View product

-10%
Out of Stock

SPARK TIP & TAIL CLIPS

SPLITBOARD UPGRADES & SPARES

Our tip and tail clip design offers a custom fit to match the variability in any board. With five progressively tighter notches, you can get your board as tight as you want. No need to freeze your fingers, this clip is effortlessly operated with your gloves on.

Includes: Clips and mounting hardware.

Weight: 0.56 oz/pr (16g)

€33.00 €29.70

View product

-10%
Out of Stock

SPARK FIXIE CLIPS TOP MOUNT

SPLITBOARD UPGRADES & SPARES

Our Fixie Clips come in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate for varying board hole patterns. They shed snow and ice, and won’t slip over time.

Top-Mount Fixie Clips are for splitboards that have inserts at the clip mounting points (you can't see screw heads on the base of your board). We have Through-Mount Fixie Clips for boards without inserts (you can see screw heads on the base of your board).

Includes: 2 left clips, 2 right clips, (8) 10mm coarse-thread screws, (8) fine coarse-thread screws, 4 grip washers.

Weight: 1.98oz/pr (56g)

€45.00 €40.50

Add to cart

-10%

SPARK FIXIE CLIPS THROUGH MOUNT

SPLITBOARD UPGRADES & SPARES

Our Fixie Clips come in a sleek, lightweight aluminum design that features no moving parts. It’s stiff, simple, and requires no rotation - just put your board together and go. The Fixies have built-in adjustability to help compensate for varying board hole patterns. They shed snow and ice, and won’t slip over time.

This model of Fixie Clip is for through-mount splitboards that are drilled through at the clip mounting points (you can see screw heads on the base of your board). We have Top-Mount Fixie Clips for boards with inserts (you do not see any screw heads on the base of your board).

Includes: 2 left clips, 2 right clips, (8) 12mm screws (for thin boards), (8) 14 mm screws (for thick boards), 4 grip nuts, 2 square nuts.

Weight: 2.26oz/pr (64g)

€45.00 €40.50

View product

-10%
Out of Stock

SPARK CROSSBAR CLIPS TOP MOUNT

SPLITBOARD UPGRADES & SPARES

For splitboarders who want the tightest possible connection or for boards with seam straightness issues, the Crossbar Clip is built for the job. Our creative design features a one-piece crossbar that extends from one set of bolts to the other. Clamping tension is finetuned by turning a set-screw. Made from aluminum and brass with only two moving parts, the Crossbar Clip closes any gap in the seam and keeps your board tight. The crossbar and lever rotate out of the way. As a bonus feature, they can be entirely set up with the M3 hex bit on your Spark tool.

Top-Mount Crossbar Clips are for splitboards that have inserts at the clip mounting points (you can't see screw heads on the base of your board). We have Through-Mount Crossbar Clips for boards without inserts (you can see screw heads on the base of your board).

Includes: 2 x Levers, 2 x Crossbars, 2 x Shear Bushings, screws for both fine thread and coarse inserts, as well as extra screws for use with thinner boards.

Weight: 3.24oz/pr (92g)

€60.00 €54.00

Add to cart

-10%

SPARK SOLID BOARD CANTED PUCKS

SPLITBOARD BINDING SPARES

We have the quiver game dialed with our Solid Board Pucks, because let’s face it, sometimes you’re just not on your split. Great for solid board mountaineering or snowmo-boarding. Perfect for trips where you are traveling with multiple boards or days when you may see a mix of resort riding and splitting. You may have a quiver of boards, but you only need one set of bindings.

Our canted version has all the same great features of our standard Spark Solid Board Pucks, only with 3° canting to reduce knee strain.

Weight: 11.50 oz/pr (326g)

€95.00 €85.50

Add to cart

-10%

SPARK PILLOW LINE TOE STRAPS

SPLITBOARD BINDING SPARES

For Spark fans who already have bindings and just want to upgrade, we are offering strap sets à la carte so everyone can enjoy the weight savings, performance, and durability.

Pillow Line Toe Straps are lightweight - 61% lighter than the Arc and 71% lighter than the Surge fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Pillow Line Toe Straps come in one construction for both Arc and Surge models, and are designed to be used as a toe cap but also fit traditionally over the top.

Weight: 4.4 oz/pr (126g) - Medium (includes buckles, ladders, adjusters, and hardware)

€59.00 €53.10

View product

-10%

SPARK ARC PILLOW LINE ANKLE STRAPS

SPLITBOARD BINDING SPARES

For Spark fans who already have bindings and just want to upgrade, we are offering strap sets à la carte so everyone can enjoy the weight savings, performance, and durability.

Arc Pillow Line Straps are lightweight - 46% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. The Arc strap footprint is smaller around the boot with a flex window for max agility while maintaining support.

Weight: 8.40 oz/pr (242g) - Medium (includes buckles, ladders, adjusters, and hardware)

€75.00 €67.50

View product

-10%

SPARK SURGE PILLOW LINE ANKLE STRAPS

SPLITBOARD BINDING SPARES

For Spark fans who already have bindings and just want to upgrade, we are offering strap sets à la carte so everyone can enjoy the weight savings, performance, and durability.

Surge Pillow Line Straps are lightweight - 53% lighter than their fabric strap predecessors. They are ultradurable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride. Surge ankle straps have a wide, asymmetrical footprint around the boot for incredible all-around support.

Weight: 8.80 oz/pr (252g) - Medium (includes buckles, ladders, adjusters, and hardware)

€79.00 €71.10

View product

-10%

KARAKORAM ULTRACLIP 2.0 STANDARD M5 TOP MOUNT

Specifications

TYPE:

Product Details

Specific References

TOURING EQUIPMENT

best style

More colors for your perfect style!

You might also like

The option to lock your heel while touring helps you better adapt to diverse terrain types where quick descents, side stepping, and skate-splitting become more effective means of backcountry travel.

The Blaze TR is Tour Ready, with LT brackets and dual height wires, so all you need in addition is pucks, a splitboard, and motivation to get out there.

All the same great features of our Spark Pucks, but with 3° canting for reduced knee strain.

Spark Dual Heigt wires for hardboot!

SPARK D REX CRAMPONS... Designed for our hardcore hardbooters!