Built for steep terrain that requires extra traction, the Whippet features a removable steel pick.

Using the innovative BD ClickLock Dial, you can attach the ice ax to add an edge of safety for icy bootpacks and drop-free descents, and then remove it to shred powder in the backcountry

Spark tailclip kit is a retrofit addition to any splitboard skins.

Large diameter rivets make for an easy and secure installation.

Spark Ibex PRO ST Crampons... Luxury 4WD for your splitboard!

With the evolution of our Tesla T1 System comes the all new Ibex Crampon, designed to work seamlessly with ALL Tesla and Tesla T1 System bindings. Backwards compatible to replace our previous Sabertooth Crampon. Lightweight aluminum construction for max strength and minimum weight. Installation and removal is effortless and can be done on the fly by sliding sideways into and out of Tesla Touring Bracket claw mounts.

Spark Ibex ST Crampons... 4WD for your splitboard!

With the evolution of our Tesla T1 System comes the all new Ibex Crampon, designed to work seamlessly with ALL Tesla and Tesla T1 System bindings. Backwards compatible to replace our previous Sabertooth Crampon. Lightweight aluminum construction for max strength and minimum weight. Installation and removal is effortless and can be done on the fly by sliding sideways into and out of Tesla Touring Bracket claw mounts.

Spark Ibex ST Crampons... 4WD for your splitboard!

With the evolution of our Tesla T1 System comes the all new Ibex Crampon, designed to work seamlessly with ALL Tesla and Tesla T1 System bindings. Backwards compatible to replace our previous Sabertooth Crampon. Lightweight aluminum construction for max strength and minimum weight. Installation and removal is effortless and can be done on the fly by sliding sideways into and out of Tesla Touring Bracket claw mounts.

Amplid Pro Skin Precut Mohair Blend by Kohla with hooks for splitboards with skinholes

These skins are only compatible with the Milligram starting from season 22/23!

Precut adhesive skins by our Austrian friends at Kohla

Pre-cut for Nitro Vertical, Doppelganger and Squash splitboards, Vertical skins offer maximum performance thanks to Kohla's new Fiber Seal and Smart Glue technologies. Fiber Seal technology prevents leathers from absorbing water, for better grip and a low-friction glide in varying conditions. Smart Glue is a solvent-free adhesive that adheres best in wet or cold conditions. Skins with Smart Glue are easier to remove than traditional skins.

NITRO VERTICAL BY KOHLA SKINS FEATURES:

• Made in Austria
• Water resistant
• Solvent free
• Trim to fit
• Easy handling
• 100% waterproof
• Easy release

If you're rocking a Nitro Team Split, the Nitro Team Splitboard Skins are an easy win. They're made of a nylon-mohair blend for the ideal balance of grip and glide, with metal speedhook attachments on both tip and tail for lightning-fast transitions. Grab the right size for your board and hit the skin track!ta!

NITRO TEAM BY KOHLA SKINS FEATURES:

• 65% Mohair / 35% Nylon – A mix of Mohair and Nylon fibers make these skins glide effortlessly while generating maximum grip.
• Metal Speedhooks – Metal Speedhooks on both ends match mounting holes in the boards tip and tail for quick and easy setup.
• 100% Waterproof
• Easy Release Smart Glue
• Fiber Seal Technology
• Solvent Free
• Laser Cut to Fit the Nitro Team Splitboard
• Pre-Cut

Made with the perfect blend of 70% mohair and 30% nylon, Hyper Glide Splitboard Skins are light, grippy, and glide so well you’ll think you left your skins in your pack. Indestructible asymmetric heat-treated aluminum clips and Voile Strap style tail straps ensures your skins stay snug and secure, while a 100% waterproof membrane between the fibers and the adhesive drastically improves durability and glue performance while reducing weight and making them more pliable for easy stowing. And the Ever Dry hydrophobic treatment makes sure they keep gripping, whatever the weather—no need for sprays or waxes to stop the glop.

Each set of Hyper Glide skins comes with a trim tool, nylon stuff sack, and a promise to be the best skins you’ve ever slapped on your board.

SIZES:

• S: 148-154 CM
• M: 155-162 CM
• L:  163-169 CM

VOILE HYPER GLIDE SKINS FEATURES:

• 70% Mohair – 30% Nylon
• Hardened and Anodized Aluminum Tip & Tail Plates
• Stainless Steel Rivets
• Stainless Steel Full-Wrap Tip Loop
• Indestructible Urethane Tail Strap
• Hardened and Anodized Aluminum Tail Clip

These skins harness POMOCA’s research and development of materials, weaving techniques, and fiber attachment systems to provide a combination of gripping power and durability in a light weight package:

• Safer Skin: A 100% waterproof membrane that prevents the transfer of moisture between the skin’s plush and adhesive layers. This drastically improves the glue performance from edge to edge while also increasing the skin’s tear resistance. This (2nd) generation of their lining is made with finer layers, which effectively reduce weight and make the skin more pliable (easier to trim, handle, and stow).
• Ever Dry: This hydrophobic treatment is applied to the entire length of the skin’s fibres, guaranteeing life-long protection without the need for antiglopping sprays.

CRAMPON FEATURES:

• Slide in and remove while skinning
• Cutouts minimize weight
• Includes storage bag to protect other gear in your pack
• Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions

If you need extra grip in icy conditions, crampons are a necessity. Fully compatible with our ENFUSE Shift binding.

ENFUSE SPLITBOARD CRAMPONS FEATURES:

• Material: Alu 6082 T6
• Weigth: 263g for pair
• Width: 138mm (inner width of the smaller crampon)

With the Karakoram Aluminum Hardware upgrade kit you will have the coolest bindings of all !!!!

Sender Specifications:

• Fits All Karakoram Prime Bindings
• Materials: Stainless Steel and Aluminum
• Sender Plate Weight: 310g per side

NITRO NOMAD PEAK BY KOHLA SKINS FEATURES:

• Specific solvent-free Hot-Melt glue
• Application range up to -30°C
• Prefabricated skin strip
• Supplied with skin bag, protective foil
• Multifit Skin
• Mixmohair (65% mohair/35% nylon)
• 4 layer lamination
• Exclusive speed webbing Nitro
• Water-resistant fluorocarbon impregnation
• Solvent-free coating
• Polyester-cotton back layer system
• PA and TPE plastic parts
• Stainless steel tip attachment

KOHLA ALPINIST 100% MOHAIR SKINS FEATURES:

• Application range up to -30°C
• Prefabricated skin strip (135 mm width)
• Supplied with skin bag, protective foil
• Lenght 170 cm100% Mohair
• Smart Glue
• High-precision laser cutting
• Butterfly back attachment
• Easy length adjustement with Elastic Strap
• Plastic parts made of the top-quality materials
• Stainless steel tip attachment

Freeride 135mm cut-to-size skin / Smart Glue

KOHLA FREERIDE SKINS FEATURES:

• Mixmohair
• 65% Mohair 35% Nylon
• Width 135mm
• Smart Glue
• High-precision laser cutting
• Application range up to -30°C
• Butterfly back attachment
• Easy length adjustement with Elastic Strap
• Plastic parts made of the top-quality materials
• Stainless steel tip attachment

FEATURES KOHLA TELESCOPIC POLES:

CRAMPON FEATURES:

• Slide in and remove while skinning
• Cutouts minimize weight
• Includes storage bag to protect other gear in your pack
• Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions

CRAMPON FEATURES:

• Slide in and remove while skinning
• Cutouts minimize weight
• Includes storage bag to protect other gear in your pack
• Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions

FEATURES VOILE CAMLOCK 2 TELESCOPIC POLES:

Made with the perfect blend of 70% mohair and 30% nylon, Hyper Glide Splitboard Skins are light, grippy, and glide so well you’ll think you left your skins in your pack. Indestructible asymmetric heat-treated aluminum clips and Voile Strap style tail straps ensures your skins stay snug and secure, while a 100% waterproof membrane between the fibers and the adhesive drastically improves durability and glue performance while reducing weight and making them more pliable for easy stowing. And the Ever Dry hydrophobic treatment makes sure they keep gripping, whatever the weather—no need for sprays or waxes to stop the glop.

Each set of Hyper Glide skins comes with a trim tool, nylon stuff sack, and a promise to be the best skins you’ve ever slapped on your board.

SIZES:

• S: 148-154 CM
• M: 155-162 CM

VOILE HYPER GLIDE SKINS FEATURES:

• 70% Mohair – 30% Nylon
• Hardened and Anodized Aluminum Tip & Tail Plates
• Stainless Steel Rivets
• Stainless Steel Full-Wrap Tip Loop
• Indestructible Urethane Tail Strap
• Hardened and Anodized Aluminum Tail Clip

These skins harness POMOCA’s research and development of materials, weaving techniques, and fiber attachment systems to provide a combination of gripping power and durability in a light weight package:

• Safer Skin: A 100% waterproof membrane that prevents the transfer of moisture between the skin’s plush and adhesive layers. This drastically improves the glue performance from edge to edge while also increasing the skin’s tear resistance. This (2nd) generation of their lining is made with finer layers, which effectively reduce weight and make the skin more pliable (easier to trim, handle, and stow).
• Ever Dry: This hydrophobic treatment is applied to the entire length of the skin’s fibres, guaranteeing life-long protection without the need for antiglopping sprays.

FEATURES KOHLA TELESCOPIC POLES:

• Ergonomic cork grip
• S-Lock outer locking system
• Hard metal tip with interchangeable basket
• KKS inner locking system
• Weight: 262 gr.
• Lenght: 69-140 cm