KARAKORAM SPLITBOARD BINDINGS ALUMINIUM...
Anodized aluminum screws for Karakoram bindings upgrade
- -10%
- New
SPLITBOARD BINDINGS & ACCESSORIES
We are mountain people. We are innovators. We are the builders of our products.Our designs and products are born from our mountain experiences. We are as passionate about our gear as we are about the mountains. We build products that we use.The belief that there is always a better way fuels our drive to create. Even though we are setting new industry standards with our products- we know we can make them even better and we will.We take pride in building each product as if it were our own gear. Our products are built with our own hands. By riders for riders.We love the mountains. We love creating. We love building our products in North Bend, Washington.
Anodized aluminum screws for Karakoram bindings upgrade
This way, even female splitboarders will be able to ride up and down the mountain with superb performance. New small boot specific straps, frame, spoiler and footbed fit up to very small boots.
Their unique design gives you the grip of a fixed ski crampon with the ease of touring of a floating crampon. The front teeth of the crampon are centered on the touring pivot allowing for full front tooth engagement regardless of the riser height. Crampons can be installed on the fly.
Crampons suitable for splitboard wide (increased width for feet)
Buy a Prime Splitboard Interface 3.0 for a second splitboard or to upgrade your older Prime Bindings to our latest technology.
Compatible with all Prime System Bindings including Guide HB. For Prime1, Prime SL, and Women’s Small Nomad-W and X-W a small modification is required.
The lightest splitboard interface in the world! All the radness of Ride Mode 3.0 in our proprietary molded carbon is 30% lighter than Ride Mode 3.0
A smaller foot print with less material makes the Ride Mode 3.0 the lightest splitboard interface. More clearance for snow makes Drop-On Change overs better and faster. Active Joining pulls your splitboard together and keeps your feet spring-loaded to the board, giving you direct power transfer to the edge and instant response in a way that passive, slip-fit puck splitboard systems cannot.
Designed for use with Tech Fitting AT ski boots. made with 7000 series aluminum, the Guide HB is the lightest Hardboot binding. The Guide HB mounts to either the Ride Mode 2.0 or Light Ride Mode. Sold as bindings only. Tech tour modes and risers are not included
Unique size (sole lenght 255 mm - 350 mm).
Upgrade your fastening system with these light, strong, and easy to use Karakoram Dual Pivot Carbon Ankle Ratchets. The Karakoram Dual Pivot Ankle Ratchets are suitable for use with all Karakoram model bindings.
Upgrade your fastening system with these light, strong, and easy to use Karakoram Carbon Dual Pivot Toe Ratchets. The Karakoram Dual Pivot Toe Ratchets are suitable for use with all Karakoram model bindings.
CLIPS FEATURES:
No expense has been spared with. CNC machined completely from 7000 Series Space-Grade Aluminum and injection molded with Carbon Nyolite, the Prime-X is a featherweight beast. This is not a flimsy, light-weight splitboard binding. We reduce weight by using stronger and lighter materials such as grade 5 titanium hardware and hollow pins. We’ve added stiffness with our new C4 Carbon highback. The Prime-X sets a new standard for backcountry snowboarders. Travel lighter, travel faster, ride harder.
Use to hold splitboard, Union Rover or skis together while hiking.
Remove the unneccesary bling and weight from your toe straps with the Air toe straps (25 grams). Made from Dupont Hytrel and designed to be used as cap or over the top strap.
Overview:
• Made from Dupont Hytrel
• Only 25 grams (50 gr. pair)
• Made in the USA
The flex-lock compatible Karakoram carbon Nyolite hibacks are supplied in pairs with the Dual Ride-Stride adjusters and the necessary mounting hardware. Flex 7/10
This product contains two spare Karakoram Surf Airpod Ankle Strap. These conform to your feet with independent compression pads, eliminating pressure points and allowing pinch point-free flex. As the name suggests, these straps give you a more soft and chill feeling while riding. Straps included and compatible with new and older Karakoram bindings.
Remove the unneccesary bling and weight from your toe straps with the Air-Form toe straps (30 grams lighter). Made from Dupont Hytrel and designed to be used as cap or over the top strap.
Overview:
• Made from Dupont Hytrel
• 30% lighter than standard straps
• Made in the USA
Karakoram Splitboard Bindings AirForm Ankle Straps fit the boot with independent compression pods that eliminate pressure points and allow for pinch-free flexibility. Keep your feet happy and your boots snug in your bindings while touring and riding.
This product contains two spare Karakoram Aggressive Airpod Ankle Strap. These conform to your feet with independent compression pads, eliminating pressure points and allowing pinch point-free flex. As the name suggests, these straps give you a more aggressive feeling while riding. Straps included and compatible with new and older Karakoram bindings.
Karakoram spare screws for Splitboard ride mode 3.0 discs and tour mode tips
Saving energy in the backcountry can be the difference between going for a second lap, going for a longer tour, or going home because you’re wiped out.
Karakoram Quiver disc protectors to store the splitboard in the bag without worries!
Spare parts toe plate base for Karakoram Connect splitboard bindings
To use your Karakoram Prime / Connect splitboard bindings even on the full board. One connection for many boards. Without removing screws!
Purchase a Ride Mode 2.0 interface to upgrade your old Prime bindings to our latest technology. Ride Mode 2.0 will work with all Karakoram Alpine Prime and Prime Connect bindings that already have tour pin adapters.
Buy the Alpine Prime EVA Foam model if you have any of the Karakoram ALPINE PRIME SPLITBOARD BINDING models.
The following binding models with the Alpine Prime EVA foam footbeds:
Includes:
Buy a Prime Splitboard Interface 2.0 for a second splitboard or to upgrade your older Prime Bindings to our latest technology. The Prime Splitboard Interface 2.0 will work with all Karakoram Alpine Prime Bindings, and Prime Connects that already have tour pin adapters.
The flex-lock compatible Karakoram hibacks are supplied in pairs with the Dual Ride-Stride adjusters and the necessary mounting hardware. Flex 5/10
The flex-lock compatible Karakoram hibacks are supplied in pairs with the Dual Ride-Stride adjusters and the necessary mounting hardware. Flex 7/10