• VOILE SPLITBOARD HARDWARE FOR STANDARD BINDINGS
  • VOILE SPLITBOARD HARDWARE FOR STANDARD BINDINGS
  • VOILE SPLITBOARD HARDWARE FOR STANDARD BINDINGS
VOILE SPLITBOARD HARDWARE FOR STANDARD BINDINGS
  • -10%

SPLITBOARD UPGRADES & SPARES

VOILE SPLITBOARD HARDWARE FOR STANDARD BINDINGS

€219.00
€197.10
Tax included

INCLUDES:

  • 1 Puck alignement guide
  • 4 pucks UPDATED PUCK DESIGN!
  • 2 parallel slot discs
  • 2 in-line slot discs
  • 4 rubber puck gaskets
  • 8 M6 x 10.7mm pan-head mounting screws
  • 8 T-nuts (6mm) for binding mounting
  • 2 slider tracks
  • 2 slider pins w/leashes
  • 2 touring brackets
  • 2 touring bracket pin guides
  • 6 M6 x 10mm touring bracket screws
  • 2 dual climbing heel pads
  • 2 climbing heel shims
  • 2 55mm climbing wires
  • 2 75mm climbing wires
  • 4 M6 x 16mm climbing heel screws
  • 1 scraper
Buy it Now
Our shipping policy

Product Details

Attention! Please Read! This hardware kit is for factory-built splitboards that have standard inserts. It is NOT for Sawing Your Old Board (Split Kit - DIY).

Voilé believes getting people into the backcountry is more important than making a few more bucks. And the Voilé Splitboard Hardware for Standard Bindings helps do just that.

If a rider owns any factory-built splitboard that has inserts, he or she can mount their existing snowboard bindings to the included Voilé Slider Track and be in business. Almost any conventional snowboard binding on the market today is compatible with the Slider Track.

Among other tidbits, the kit includes 2 Voilé Slider Tracks, a full puck set and alignment guide, 2 Dual Climbing Heel with 55mm and 75mm climbing wires, and of course, 2 Voilé Slider Pins.

Yes, it’s a lot of bits and pieces and not as easy as tying your shoe to install, but don’t be daunted by it all. It wouldn’t bear our logo if it wasn’t bomber or was over-complicated.

Split Hooks and Tip Clips not included.

2 lbs 7 oz./1089g

Specific References

You might also like

IBEX SPLITBOARDING CRAMPON BLACK

SPARK IBEX SPLITBOARD CRAMPON BLACK

SKINS, CRAMPONS & POLES

CRAMPON FEATURES:

  • Slide in and remove while skinning
  • Cutouts minimize weight
  • Includes storage bag to protect other gear in your pack
  • Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions
  • Choose the size based on the width of your splitboard:

NARROW 25CM OR LESS

REGULAR 25/26 CM

WIDE 26CM OR MORE

Regular price €135.00 Price
€121.50
  • On sale!
  • -10%
  1. SPARK T1 HEEL LOCKER
  2. SPARK T1 HEEL LOCKER
  3. SPARK T1 HEEL LOCKER
SPARK T1 HEEL LOCKER
SPARK T1 HEEL LOCKER
SPARK T1 HEEL LOCKER

SPARK T1 STEP LOCKER

SPLITBOARD BINDING SPARES

The option to lock your heel while touring helps you better adapt to diverse terrain types where quick descents, side stepping, and skate-splitting become more effective means of backcountry travel.

Our Step Lock design makes it easier than ever, with the ability to rotate the lever to the locked position, then simply step down to lock the heel. The heel stays securely locked in place until you rotate the lever to the unlocked position.

Regular price €59.00 Price
€53.10
Add to cart
  • -10%
  1. VOILE SPLITBOARD HARDWARE PUCK SET
  2. VOILE SPLITBOARD HARDWARE PUCK SET
VOILE SPLITBOARD HARDWARE PUCK SET
VOILE SPLITBOARD HARDWARE PUCK SET

VOILE SPLITBOARD HARDWARE PUCK SET

SPLITBOARD UPGRADES & SPARES

INCLUDES:

  • 4 pucks UPDATED PUCK DESIGN!
  • 4 puck gaskets
  • 2 in-line slot discs
  • 2 parallel slot discs
  • 8 - M6 x 10.7mm truss-head screws
  • 1 Alignment guide.
Regular price €79.00 Price
€71.10
  • -10%
SPARK BD TOURING STRAPS

SPARK BD TOURING STRAPS

SPLITBOARD BINDING SPARES

Replacing our fabric and Velcro Strappy Strap is the 25 inch (63.5cm) Black Diamond Touring Strap. It still slots through your Spark R&D highbacks and wraps around your boot for additional edging power while touring, but is more multifunctional as an all-around backcountry tool than its predecessor. Packaged as a set of two.

Weight: 1.3 oz/ea (39g) - 2.6 oz/pr (78g)

Regular price €25.00 Price
€22.50
  • -10%
  1. SPARK PUCKS SPLITBOARD
  2. SPARK PUCKS SPLITBOARD
  3. SPARK PUCKS SPLITBOARD
SPARK PUCKS SPLITBOARD
SPARK PUCKS SPLITBOARD
SPARK PUCKS SPLITBOARD

SPARK PUCKS SPLITBOARD

SPLITBOARD UPGRADES & SPARES

Near infinite adjustability for splitboards built with inserts. The unique, patent-pending design gives the Spark Pucks channel-like adjustability for regular splitboards.

Weight: 10.02oz/pr (284g)

Regular price €89.00 Price
€80.10
Add to cart
  • -10%
SPARK BACKCOUNTRY KIT SPLITBOARD

SPARK BACKCOUNTRY KIT SPLITBOARD

SPLITBOARD BINDING SPARES

Regular price €45.00 Price
€40.50
  • -10%
  • Out of Stock
  1. SPARK SPLITBOARD SKINS
  2. SPARK SPLITBOARD SKINS
  3. SPARK SPLITBOARD SKINS
SPARK SPLITBOARD SKINS
SPARK SPLITBOARD SKINS
SPARK SPLITBOARD SKINS

SPARK SPLITBOARD SUMMIT SKINS

SKINS, CRAMPONS & POLES

The newly constructed Summit Skins are a full nylon custom design manufactured in the USA. They’re lightweight and feature solid grip with improved glide

SPARK SUMMIT SKINS FEATURES:

  • SIZES: SMALL (147-161CM) - MEDIUM (159-175CM)
  • Tailclips: Dual angled hooks can accommodate the ever-changing variety of board shapes on the market. Blunt and Square shapes use the outer hook, while standard and swallowtails use the inner hook. Extended slots in the tailclip offer boundless adjustability for the perfect combination of position, angle, and tail stretcher tension with your board.
  • Tail Stretcher: Injection molded in-house using a Pebax® thermoplastic material that is tear-resistant and stays flexible even in freezing temperatures. The built-in texture grips the tailclip to keep it firmly positioned with no slippage, and also makes it easy to grab with gloves on.
  • Industry Leading Material: Full nylon material provides the perfect blend of grip and glide.
  • Crazy Good Glue: Long-lasting glue is laid down in multiple stripes to be sticky on your board, but not too sticky to pull apart.
  • Storage: Includes storage bag and trim tool.
Regular price €209.00 Price
€167.20
Add to cart
  • On sale!
  • -20%
  1. SPARK CANTED PUCKS FOR SPLITBOARDS
  2. SPARK CANTED PUCKS FOR SPLITBOARDS
  3. SPARK CANTED PUCKS FOR SPLITBOARDS
SPARK CANTED PUCKS FOR SPLITBOARDS
SPARK CANTED PUCKS FOR SPLITBOARDS
SPARK CANTED PUCKS FOR SPLITBOARDS

SPARK CANTED PUCKS FOR SPLITBOARDS

SPLITBOARD UPGRADES & SPARES

All the same great features of our Spark Pucks, but with 3° canting for reduced knee strain.

Near infinite adjustability for splitboards with inserts. Quick mounting with super fine foot placement, angle, and toe/heel centering adjustments.

Regular price €89.00 Price
€80.10
Add to cart
  • -10%
SPARK CUTOUT BASAPLATE PADDING

SPARK ARC CUTOUT BASAPLATE PADDING

SPLITBOARD BINDING SPARES

SPARK CUTOUT PAD FEATURES:

  • Increase foot warmth and comfort on long tours with our Baseplate Padding Kits. Made of durable and grippy EVA foam.  3M peel and stick adhesive keeps pads firmly in place. Ideal for long days on the skin track or firm riding conditions.
  • Cutout (for Magneto, Arc, Arc Pro & Burton Hitchhikers)
  • Average Weight: 0.67oz/pr (19g)
  • SIZE CHART:
VERSION MODEL MEN'S WOMEN'S
SIZE 1 ARC XS/S
SIZE 2 ARC S M/L
SIZE 3 ARC M, L
Regular price €22.00 Price
€19.80
  • -10%
  1. SPARK HARDBOOT DUAL HEIGT WIRES
  2. SPARK HARDBOOT DUAL HEIGT WIRES
  3. SPARK HARDBOOT DUAL HEIGT WIRES
SPARK HARDBOOT DUAL HEIGT WIRES
SPARK HARDBOOT DUAL HEIGT WIRES
SPARK HARDBOOT DUAL HEIGT WIRES

SPARK HARDBOOT DUAL HEIGT WIRES

SPLITBOARD BINDING SPARES

Spark Dual Heigt wires for hardboot!

Regular price €79.00 Price
€71.10
  • -10%
  • Out of Stock
  1. SPARK D REX SPLITBOARD CRAMPONS
  2. SPARK D REX SPLITBOARD CRAMPONS
SPARK D REX SPLITBOARD CRAMPONS
SPARK D REX SPLITBOARD CRAMPONS

SPARK D REX SPLITBOARD CRAMPONS

SKINS, CRAMPONS & POLES

SPARK D REX CRAMPONS... Designed for our hardcore hardbooters!

Install and remove on the fly for utmost confidence in dicey conditions

Regular price €135.00 Price
€121.50
  • -10%
  1. SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME
  2. SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME
  3. SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME
SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME
SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME
SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME

SPARK IBEX PRO SPLITBOARD CRAMPON BLACK LIME

SKINS, CRAMPONS & POLES

If you want the best of the best, we made this for you. A 7075 aluminum crampon body is just as strong, but lighter and thinner than our standard Ibex. It slices through the snow even better with less drag, saving you valuable energy output on the skintrack. Our new dual-width design features one crampon that is slightly wider than the other, allowing the crampons to nest together for easy handling and reduced packing space.
All in all, the Ibex Pro crampon is 22% lighter than our standard Ibex - the lightest split crampon in the world!

SPARK IBEX PRO CRAMPON FEATURES:

  • Easy Installation and Removal: Slide in and out of touring bracket crampon mounts while skinning, without removing your bindings.
  • Made for the Steeps: Climbing wire pushes crampon teeth fully into the snow for secure ascents on steep terrain and in firm conditions.
  • Nesting Design: Our new dual-width design features one crampon that is slightly wider than the other, allowing the crampons to nest together for easy handling and reduced packing space.
  • Lightweight: Premium 7075 aluminum.
  • Storage: Includes storage bag to protect other gear in your pack.
  • Weight:  4.59 oz/ea (130g) – 9.18 oz/pr (260g) - Regular
  • Compatible with Arc, Surge, AfterBurner, Magneto, & Burton Hitchhiker Bindings.
  • Heel Locker and Riser Kit compatible.
Regular price €145.00 Price
€116.00
  • On sale!
  • -20%
  • Out of Stock
  1. VOILE SPARTAN ASCENT SPLITBOARD
  2. VOILE SPARTAN ASCENT SPLITBOARD
  3. VOILE SPARTAN ASCENT SPLITBOARD
VOILE SPARTAN ASCENT SPLITBOARD
VOILE SPARTAN ASCENT SPLITBOARD
VOILE SPARTAN ASCENT SPLITBOARD

VOILE SPARTAN ASCENT SPLITBOARD

SPLITBOARD

If the purpose of the Voile Spartan is to “get your butt in the backcountry”, then the purpose of the Spartan Ascent is to keep your butt in the backcountry.

There wouldn’t be such a thing as $100 lift tickets if this were an easy task, and even a few ounces of weight reduction in your equipment can make a huge difference in your level of enjoyment when you're making that approach on foot.

Regular price €799.95 Price
€479.97
  • On sale!
  • -40%