
- -10%
SPLITBOARD UPGRADES & SPARES
CLIPS FEATURES:
CRAMPON FEATURES:
NARROW 25CM OR LESS
REGULAR 25/26 CM
WIDE 26CM OR MORE
Our Step Lock design makes it easier than ever, with the ability to rotate the lever to the locked position, then simply step down to lock the heel. The heel stays securely locked in place until you rotate the lever to the unlocked position.
Replacing our fabric and Velcro Strappy Strap is the 25 inch (63.5cm) Black Diamond Touring Strap. It still slots through your Spark R&D highbacks and wraps around your boot for additional edging power while touring, but is more multifunctional as an all-around backcountry tool than its predecessor. Packaged as a set of two.
Weight: 1.3 oz/ea (39g) - 2.6 oz/pr (78g)
Near infinite adjustability for splitboards built with inserts. The unique, patent-pending design gives the Spark Pucks channel-like adjustability for regular splitboards.
Weight: 10.02oz/pr (284g)
This board is tolerant and efficient in all snow conditions.
Handshaped in France, the distinctive characteristic of its design lays in the symetrical construction where each element matters.
Splitboard special crampons with entry on the top.
WARNING: CRAMPONS ONLY COMPATIBLE WITH PLUM FEYANG, PLUM ETERLOU AND PLUM PEKYE.
Available in 2 sizes, 130 mm or 145 mm. Super fast, it is not necessary with this system to slide the crampons on the side of the binding to put it in place!
All you have to do is position the crampon at a 90 degree angle above the binding.Less wear and tear during placement hence less risk of breaking the crampon.
Size: 130 mm width
Splitboard special crampons with entry on the top.
WARNING: CRAMPONS ONLY COMPATIBLE WITH PLUM FEYANG, PLUM ETERLOU AND PLUM PEKYE.
Available in 2 sizes, 130 mm or 145 mm. Super fast, it is not necessary with this system to slide the crampons on the side of the binding to put it in place!
All you have to do is position the crampon at a 90 degree angle above the binding.Less wear and tear during placement hence less risk of breaking the crampon.
Size: 145 mm width
The D-board increases performance in ride mode and increases force between the two skis of your splitboard.
IMPORTANT: To be mounted only on splitboards with inserts conforming to the Voilé standard. Use the original screws provided with your splitboard bracket only if they meet the 5 mm to 5.5 mm insertion depth in the board (snowboard standard). If not, use appropriate screws that meet this standard. Follow the mounting instructions supplied with your D-board. Screws not included.