INCLUDES:

• 4 pucks UPDATED PUCK DESIGN!
• 4 puck gaskets
• 2 in-line slot discs
• 2 parallel slot discs
• 8 - M6 x 10.7mm truss-head screws
• 1 Alignment guide.

CLIPS FEATURES:

• ACTIVE JOINING
• Smaller footprint for less visible clutter.
• SET SCREW MICRO-ADJUSTMENT
  
• Increase or decrease tension in the UltraClip with the turn of a screw.
• 10% lighter.  Every gram counts.

Specifications

• Compatible with Top Mount Board and Through Mount Boards
• Boards with Fine Thread Inserts require custom hardware

Kohla protective net film to protect the adhesive surface from the hair

Dimensions: 140x1900mm

Peak 135mm Splitboard Universal cut-to-size skin Skin / Hotmelt Glue

KOHLA SKINS FEATURES:

• Specific solvent-free Hot-Melt glue
• Application range up to -30°C
• Prefabricated skin strip (135 mm width)
• Supplied with skin bag, protective foil
• Lenght 170 cm
• Multifit Skin
• Mixmohair (65% mohair/35% nylon)
• 4 layer lamination
• Exclusive speed webbing
• Water-resistant fluorocarbon impregnation
• Solvent-free coating
• Polyester-cotton back layer system
• PA and TPE plastic parts
• Stainless steel tip attachment
• Butterfly attachment

FEATURES KOHLA TELESCOPIC POLES:

• Ergonomic cork grip
• S-Lock outer locking system
• Hard metal tip with interchangeable basket
• KKS inner locking system
• Weight: 262 gr.
• Lenght: 69-140 cm

If the purpose of the Voile Spartan is to “get your butt in the backcountry”, then the purpose of the Spartan Ascent is to keep your butt in the backcountry.

There wouldn’t be such a thing as $100 lift tickets if this were an easy task, and even a few ounces of weight reduction in your equipment can make a huge difference in your level of enjoyment when you're making that approach on foot.

If the purpose of the Voile Spartan is to “get your butt in the backcountry”, then the purpose of the Spartan Ascent is to keep your butt in the backcountry

There wouldn’t be such a thing as $100 lift tickets if this were an easy task, and even a few ounces of weight reduction in your equipment can make a huge difference in your level of enjoyment when you're making that approach on foot.

INCLUDES:

• 4 canted pucks UPDATED PUCK DESIGN!
• 4 puck gaskets
• 2 in-line slot discs
• 2 parallel slot discs
• 8 - M6 x 10.7mm truss-head screws
• 1 Alignment guide.

This is the Voilè Spartan Splitboard. True to its name and to our motto—simple, solid, backcountry

No frills, add-ons, or special features, the Spartan is a board born for a single purpose—getting your butt in the backcountry.  

Splitboard innovation just took a massive leap forward.

Witness the Voile Light Speed Binding, now complete with a marvelously simple and pin-free Quick-Lock touring bracket. Naturally, it employs our most durable materials and time-tested manufacturing methods: during your tours, T6-tempered rails snap securely to a precision-formed apparatus of stainless steel and Super-Tough nylon.

Simplify, reduce weight, and increase performance of your Voile splitboard with the new Voile Light Rail splitboard binding.

The Light Rail integrates the Slider Track and Strap Binding into a lightweight, low profile, but rigid splitboard binding.

The lightweight, laser cut 6061-T6 aluminum base plate is designed to eliminate ice build-up and the extended vertical sides improve stability and performance. A fully adjustable heel cup allows the high back to reach negative angles for more comfortable touring and a longer stride. The aluminum rails are CNC machined from solid 7075-T6 bar stock and anodized for amazing durability

Made with the perfect blend of 70% mohair and 30% nylon, Hyper Glide Splitboard Skins are light, grippy, and glide so well you’ll think you left your skins in your pack. Indestructible asymmetric heat-treated aluminum clips and Voile Strap style tail straps ensures your skins stay snug and secure, while a 100% waterproof membrane between the fibers and the adhesive drastically improves durability and glue performance while reducing weight and making them more pliable for easy stowing. And the Ever Dry hydrophobic treatment makes sure they keep gripping, whatever the weather—no need for sprays or waxes to stop the glop.

Each set of Hyper Glide skins comes with a trim tool, nylon stuff sack, and a promise to be the best skins you’ve ever slapped on your board.

SIZES:

• S: 148-154 CM
• M: 155-162 CM

VOILE HYPER GLIDE SKINS FEATURES:

• 70% Mohair – 30% Nylon
• Hardened and Anodized Aluminum Tip & Tail Plates
• Stainless Steel Rivets
• Stainless Steel Full-Wrap Tip Loop
• Indestructible Urethane Tail Strap
• Hardened and Anodized Aluminum Tail Clip

These skins harness POMOCA’s research and development of materials, weaving techniques, and fiber attachment systems to provide a combination of gripping power and durability in a light weight package:

• Safer Skin: A 100% waterproof membrane that prevents the transfer of moisture between the skin’s plush and adhesive layers. This drastically improves the glue performance from edge to edge while also increasing the skin’s tear resistance. This (2nd) generation of their lining is made with finer layers, which effectively reduce weight and make the skin more pliable (easier to trim, handle, and stow).
• Ever Dry: This hydrophobic treatment is applied to the entire length of the skin’s fibres, guaranteeing life-long protection without the need for antiglopping sprays.

In situations where a splitboarder needs better control and maneuverability when skiing their individual board halves, the Voile Heel Lockdown slides in for the win. While traversing ridgelines, sidestepping, or when cruising rolling terrain to the next ascent, the Heel Lockdown does just what its name suggests.

Seated securely under the Dual Climbing Heels, the Heel Lockdown’s two nylon hooks slide into your binding’s rails, fastening them to the board. No more faux telemark turns for you, buddy.

Compatible with the Speed Rail, Light Rail, and Slider Track

Sold as a pair

*Fixed mode on Light Rail Crampon and Splitboard Crampon for Slider Track is NOT possible with the inclusion of the Voile Heel Lock.

With this kit, you have the possibility to modify your Voile Light Rail in a more performing Light Speed.

By simply replacing the bolted rails under the binding base and the quick tips you will get a lighter and faster splitboard binding when switching from tuoring to downhill!

INCLUDES:

• Light speed rails
• Light speed touring bracket
• Viteria

DOES NOT INCLUDE:

• Splitboard Puck

In the backcountry, the unexpected is just around the corner ... get ready!

This kit includes everything you need to prevent a day of riding from being interrupted.

In the backcountry, the unexpected is just around the corner ... get ready!

This kit includes everything you need to prevent a day of riding from being interrupted.

In the backcountry, the unexpected is just around the corner ... get ready!

A set of 8 Voile T-Nuts (M6) for mounting your splitboard binding to the Voile Channel Puck System.

The re-imagined T-Nuts for Voile Splitboard Channel Puck System allow you to make stance adjustments faster and easier, create a more secure mount for Voile splitboard bindings, and extend the system's compatibility with third-party bindings such as Phantom and Karakoram.

FEATURES VOILE CAMLOCK 2 TELESCOPIC POLES:

CRAMPON FEATURES:

• Slide in and remove while skinning
• Cutouts minimize weight
• Includes storage bag to protect other gear in your pack
• Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions

CRAMPON FEATURES:

• Slide in and remove while skinning
• Cutouts minimize weight
• Includes storage bag to protect other gear in your pack
• Climbing wire pushes crampon teeth firmly into the snow for secure ascents on steep terrain and in firm conditions

Tail straps for splitboard climbing skins. 10" length skin tail straps are used on regular splitboard skins. 15" length is used on V-Tail splitboard skins.

Tail straps for splitboard climbing skins. 10" length skin tail straps are used on regular splitboard skins. 15" length is used on V-Tail splitboard skins.

FEATURES KOHLA TELESCOPIC POLES:

Freeride 135mm cut-to-size skin / Smart Glue

KOHLA FREERIDE SKINS FEATURES:

• Mixmohair
• 65% Mohair 35% Nylon
• Width 135mm
• Smart Glue
• High-precision laser cutting
• Application range up to -30°C
• Butterfly back attachment
• Easy length adjustement with Elastic Strap
• Plastic parts made of the top-quality materials
• Stainless steel tip attachment

KOHLA ALPINIST 100% MOHAIR SKINS FEATURES:

• Application range up to -30°C
• Prefabricated skin strip (135 mm width)
• Supplied with skin bag, protective foil
• Lenght 170 cm100% Mohair
• Smart Glue
• High-precision laser cutting
• Butterfly back attachment
• Easy length adjustement with Elastic Strap
• Plastic parts made of the top-quality materials
• Stainless steel tip attachment